We just wanted to say thank you for the blades and the bolts which you provided. We have had a few little snags but we overcame them and our Veneer people think they are the best blades they have ever used!
Hopefully they will last as long as the old ones and I will be retired by the time we need to re-order……………………..
Thanks and Best Regards
Bill Cleyndert & Company Ltd
..here is a progress update on the machine that we are constructing, your specified blade material arrived last Friday (26/07/13) and we immediately set about making a drilling jig so we could fabricate two blades. Within a couple of hours we were cutting our first test pieces, the ease at which this blade cuts was evident at the first cut, we have now done about 200 test cuts and the blades are showing no signs of wear.
This I am pleased to say seems to be the right blade first time, so a big thank you to you and your team for taking the time to research this application for us, hopefully over the next few days I can finish this project and send you some photos of the finished machine and its product.
Once again many thanks,
Corru-tube / Tech-tube
..we ordered these custom blades in 2011, they were for an idea that I had to cut 25mm ø PVC tubing to 300mm lengths from a full reel.
I designed a Pneumatic guillotine and had custom blades manufactured by Mastercut, we had to order 5 blades due to the set up costs involved.
Well to date we have cut 23,000 pieces and are only on the second blade, this is not because the first blade failed, it was only as I had the machine apart for other reasons that the blade was changed.
From the start of contact with Mastercut to receiving the finished blades was a nice easy process, and the fact that the blades are far exceeding what I thought they would is a credit to the quality of the blades supplied.
Thanks & regards